SplashBase LM3S6x setup for beginner

Got a problem you need to solve? Ask us here and we will see if there's a way to do it with our kit

Re: SplashBase LM3S6x setup for beginner

Postby Carl-SolderSplash » Mon Jan 13, 2014 9:17 pm

BAUD : 115200
Data Bits : 8
Stop Bits : 1
Parity : None
Flow : None or XON/OFF (Should work with both)

Leave the rest as default.

Connect and Hit enter, you should get a menu.
User avatar
Carl-SolderSplash
Site Admin
 
Posts: 223
Joined: Sun Mar 17, 2013 11:15 pm

Re: SplashBase LM3S6x setup for beginner

Postby naokibizen » Thu Jan 16, 2014 7:53 am

Hello SolderSPlash!

The connestion between Mac and SplashBase Board became successful with the second SplashBase board we have received this week in January. Thus we understand what was wrong with the board now.

Thank you for your kind and super quick assistance and we can go forward now !!

Best Regards, We close the thread.
naokibizen
 
Posts: 8
Joined: Sat Dec 07, 2013 2:30 pm

Re: SplashBase LM3S6x setup for beginner

Postby Dave » Thu Jan 16, 2014 10:03 am

Could I ask what was the problem with the first board.

This could help other users.
Dave
 
Posts: 58
Joined: Fri Mar 29, 2013 12:48 am

Re: SplashBase LM3S6x setup for beginner

Postby Carl-SolderSplash » Thu Jan 16, 2014 3:23 pm

naokibizen wrote:Hello SolderSPlash!

The connestion between Mac and SplashBase Board became successful with the second SplashBase board we have received this week in January. Thus we understand what was wrong with the board now.

Thank you for your kind and super quick assistance and we can go forward now !!

Best Regards, We close the thread.


Super! I assume the relays work? I shipped them connected this time to avoid confusion.

Then you can look at relay control over the network with the Android app or PC app.
User avatar
Carl-SolderSplash
Site Admin
 
Posts: 223
Joined: Sun Mar 17, 2013 11:15 pm

Re: SplashBase LM3S6x setup for beginner

Postby naokibizen » Sat Jan 18, 2014 1:39 pm

Hello Dave,

Dave wrote:Could I ask what was the problem with the first board.

This could help other users.

The reason was simple... the first board did not work as expected as the second board does in terms of USB connection. The problem may be caused by our previous misunderstanding of AC Adapter or others.... we will not investigate more than that.

Best Regards,
naokibizen
 
Posts: 8
Joined: Sat Dec 07, 2013 2:30 pm

Re: SplashBase LM3S6x setup for beginner

Postby naokibizen » Sat Jan 18, 2014 1:58 pm

Hello SolderSPlash,

IThe second SplashBase board works as expected. We can switch on and off for 4 relays -- thank you!!
I guess we have done what we wanted to do. We close the thread now... m(_ _)m

Best Regards,
naokibizen
 
Posts: 8
Joined: Sat Dec 07, 2013 2:30 pm

Previous

Return to How Do I?

Who is online

Users browsing this forum: No registered users and 1 guest

cron