Powering a DipCortex

Talk about our 40 Pin Dip ARM Cortex M3 / M0 Here

Powering a DipCortex

Postby Dave » Mon May 20, 2013 11:17 am

Can the DipCortex be powered externally without the USB cable connected?

I'm guessing it can but I fried my first Xino mini by wiring it up wrong and don't want to do the same thing to one of my DipCortex as there are limited numbers available at the moment.

Am I correct in thinking I use pins 11 and 12 with either 3.3v or 5v depending on how the DipCortex is set?
Dave
 
Posts: 58
Joined: Fri Mar 29, 2013 12:48 am

Re: Powering a DipCortex

Postby Carl-SolderSplash » Mon May 20, 2013 4:10 pm

Yes you can power it externally and you are correct it is all based on the setting of SJ1.

If set to output 3.3v only supply 3.3v externally. If set to 5v only supply 5v externally.

Via pins 11 & 32.

Always good to ask :)
User avatar
Carl-SolderSplash
Site Admin
 
Posts: 223
Joined: Sun Mar 17, 2013 11:15 pm

Re: Powering a DipCortex

Postby Dave » Tue May 21, 2013 9:10 am

Yes always worth asking.

I learned the hard way last time.
Dave
 
Posts: 58
Joined: Fri Mar 29, 2013 12:48 am


Return to DipCortex M3/M0

Who is online

Users browsing this forum: No registered users and 1 guest

cron